View PDS5100H1_645321.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SPICE MODEL: PDS5100H
PDS5100H
5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER
PowerDI a5
Features
* * * * * * * * *
Guard Ring Die Construction for Transient Protection High Maximum Junction Temperature Very Low Leakage Current Highly Stable Oxide Passivated Junction Low Forward Voltage Drop High Forward Surge Current Capability Lead Free Finish, RoHS Compliant (Note 1) "Green" Molding Compound (No Br, Sb) Qualified to AEC-Q101 Standards for High Reliability
L1 e b1 D D2 b2
L E2 E E
D b2 L1
A A2
PowerDIa5 Dim
E1
Min 1.05 0.33 0.80 1.70 3.90 6.40 5.30 0.75 0.50 1.20
Max 1.15 0.43 0.99 1.88 4.05 6.60 5.45 0.95 0.65 1.50
A A2 b1
b1
A2
b2 D D2 E e E1 E2 L L1
Mechanical Data
* * * * * * *
Case: PowerDI 5 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish - Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Marking: See Page 3 Weight: 0.096 grams (approximate)
LEFT PIN RIGHT PIN
3.05 NOM 1.84 NOM 3.55 NOM
a
W
L1 e
e3
b1
b1
BOTTOMSIDE HEAT SINK
W
All Dimensions in mm
Note: Pins Left & Right must be electrically connected at the printed circuit board.
Maximum Ratings
@ TA = 25C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See also figure 5) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load Symbol VRRM VRWM VR VR(RMS) IO IFSM Value 100 71 5 250 Unit V V A A
Thermal Characteristics
Characteristic Thermal Resistance Junction to Soldering Point Thermal Resistance Junction to Ambient Air (Note 2) TA = 25C Thermal Resistance Junction to Ambient Air (Note 3) TA = 25C Thermal Resistance Junction to Ambient Air (Note 4) TA = 25C Operating Temperature Range Storage Temperature Range
Notes: 1. 2. 3. 4.
Symbol RqJS RqJA RqJA RqJA Tj TSTG
Typ 3/4 85 70 45 -65 to +175 -65 to +175
Max 2.0 3/4 3/4 3/4
Unit C/W C/W C/W C/W C C
RoHS revision 13.2.2003. High Temperature Solder Exemption Applied, see EU Directive Annex Note 7. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
DS30471 Rev. 18 - 2
PowerDI is a trademark of Diodes Incorporated.
1 of 4 www.diodes.com
PDS5100H
a Diodes Incorporated
Electrical Characteristics
Characteristic Reverse Breakdown Voltage (Note 5) Forward Voltage
@ TA = 25C unless otherwise specified Symbol V(BR)R VF Min 100 3/4 3/4 3/4 3/4 3/4 3/4 Typ 3/4 0.67 0.55 0.75 0.62 0.3 0.5 Max 3/4 0.71 0.58 0.80 0.66 3.5 4.5 Unit V V mA mA Test Condition IR = 3.5mA IF = 5A, TS = 25C IF = 5A, TS = 125C IF = 10A, TS = 25C IF = 10A, TS = 125C TS = 25C, VR = 100V TS = 125C, VR = 100V
Reverse Leakage Current (Note 5)
Notes:
IR
5. Short duration test pulse used to minimize self-heating effect.
IF, INSTANTANEOUS FORWARD CURRENT (A)
10
Tj = +175C
IR, INSTANTANEOUS REVERSE CURRENT (A)
100
1
Tj = +125C
100n
Tj = +25C
100m
10n
10m
Tj = +85C
1m
Tj = +25C
1n
Tj = -65C
Tj = -65C
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
0
20
40
60
80
100
VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristics
IR, INSTANTANEOUS REVERSE CURRENT (A) 10m
Tj = +175C
VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics
800 700 CT, TOTAL CAPACITANCE (pF)
f = 1MHz
1m
600 500 400 300 200 100 0
Tj = +125C
Tj = +85C
0
20
40
60
80
100
0
5
10
15
20
25
30
VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics
VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance vs. Reverse Voltage
DS30471 Rev. 18 - 2
PowerDI is a trademark of Diodes Incorporated.
2 of 4 www.diodes.com
PDS5100H
7.5 IF, DC FORWARD CURRENT (A)
4 PF(AV), AVERAGE FORWARD POWER DISSIPATION (W)
IPK = 1 (DC) IAV
6.0
3
4.5
Note 4
2
3.0
Note 2
1.5
1
0 0 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (C) Fig. 5 DC Forward Current Derating
200
0 0 1 2 3 4 5 6 7 8 9 10 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 6 Forward Power Dissipation
TA, DERATED AMBIENT TEMPERATURE (C)
180 160 140 120 100 80 60 40 20 0 0 25 50 75
Note 2
100
VR, DC REVERSE VOLTAGE (V) Fig. 7 Operating Temperature Derating
Ordering Information
Device PDS5100H-13
Notes: 2. 3. 4. 5. 6.
(Note 6) Packaging PowerDIa5 Shipping 5000/Tape & Reel
FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm. Short duration test pulse used to minimize self-heating effect. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
S5100H YYWWK
S5100H = Product type marking code = Manufacturers' code marking YYWW = Date code marking YY = Last two digits of year ex: 04 for 2004 WW = Week code 01 to 52 K = Factory Designator
DS30471 Rev. 18 - 2
PowerDI is a trademark of Diodes Incorporated.
3 of 4 www.diodes.com
PDS5100H
IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.
DS30471 Rev. 18 - 2
PowerDI is a trademark of Diodes Incorporated.
4 of 4 www.diodes.com
PDS5100H

▲Up To Search▲

Price & Availability of PDS5100H1

	To Download PDS5100H1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .